190-01115-01 G3X/G3X Touch Installation Manual - Inventory of MaterialsRev. AA Page 1-141.4 Required non-Garmin Equipment1.4.1 Wiring/Cabling ConsiderationsThe installer will provide all wiring and cabling unless otherwise noted. Use MIL-W-22759/16 (or otherapproved wire) AWG #22 or larger wire for all connections unless otherwise specified. The suppliedstandard pin contacts are compatible with up to AWG #22 wire. RG400 or RG142 coaxial cable with 50 nominal impedance and meeting applicable aviation regulations should be used for the installation.1.4.2 Contact and Crimp ToolsTable 1-32 lists recommended crimp tools used to build the wiring harnesses for the G3X LRUs, otherequivalent tooling may also be used.NOTENon-Garmin part numbers shown are not maintained by Garmin and consequently aresubject to change without notice.Table 1-32 Pin Contact and Crimp Tools Part NumbersLRU Contact TypeGarminContact PartNumberRecommendedPositionerRecommendedInsertion/Extraction ToolRecommendedHandCrimping ToolGDU 37XGDU 4XX Socket, Size 20 336-00022-02or 336-00094-00M22520/2-08,Daniels K13-1M81969/1-04for size 22Dpins andM81969/1-02for size 20 pinsM22520/2-01GMC 305/307Pin, Size 22D336-00021-00(MIL P/NM39029/58-360)M22520/2-09Positronic P/N9502-4,Daniels P/N K42GSU 73GTP 59011-00979-20(Configmodule w/EEPROM kit)011-00981-00(thermocouplekit)GMU 22 Socket, Size 20336-00022-00(MIL P/NM39029/63-368)M22520/2-08,Daniels K13-1011-00979-22(Configmodule w/Sockets &Jackscrew kit)Socket, Size 20,26-30 AWG 336-00022-01M22520/2-08,Daniels K13-1Use crimpsetting 6 for 28AWGGAD 27/29Socket, Size 20,20-24 AWG 336-00022-02M22520/2-08,Daniels K13-1GEA 24(J241, J243,J244)GSA 28GSU 25GTR 20/200GAD 29Pin, Size 20336-00024-00(MIL P/NM39029/64-369)GEA 24(J242 only)
