190-01115-01 G3X/G3X Touch Installation Manual - GAD 29 InstallationRev. AA Page 4-24.2 Equipment Available4.2.1 Required Equipment4.2.2 Additional Equipment RequiredThe connector kit in Table 4-2 is required to install the unit, it is not provided with the GAD 29 unit.4.3 General SpecificationsSee Section 2.2 for power/current specifications, and Section 2.4.1 for dimension/weight specifications.4.4 Mounting RequirementsThe GAD 29 will mount remotely. The GAD 29 will be secured to the airframe using four screws suppliedby the installer. Refer to Section 4.6 for outline and installation drawings.4.5 Unit InstallationFabrication of a wiring harness is required. Sound mechanical and electrical methods and practices arerecommended for installation of the GAD 29. Refer to Section 2.3 for wiring considerations, and toSection 23.1 for pinouts.1. Mount the unit to a suitable mounting location using (4) #10-32 pan or hex head screws.2. Assemble the connector backshells and wiring harness.3. Connect CAN terminator to unit if required (Section 2.3.1.3.3).4. Connect backshell connectors.Table 4-1 GAD 29 Part NumbersModel Assembly PartNumberUnit Only PartNumberGAD 29 010-01172-00 011-03236-00Table 4-2 Contents of GAD 29 Connector Kit (011-03271-00)Item Garmin P/N QuantityBackshell w/Hdw, Jackscrew, 9 Pin 011-01855-00 1Backshell w/Hdw, Jackscrew, 25 Pin 011-01855-02 1Conn, Plug,D-Sub, Crimp Pin, Commercial, 25 CKT 330-00624-25 1Conn, Rcpt, D-Sub, Crimp Socket, Commercial, 09 CKT 330-00625-09 1Contact, Socket, Military Crimp, Size 20 336-00022-02 11Contact ,Pin, Military Crimp, Size 20 336-00024-00 27
