Garmin GMR 1204 Installation Instructions Manual

Contents

1 GMR 600/100 Series Installation InstructionsFailure to avoid the following potentially hazardous situations could result inan accident or collision resulting in death or serious injury.The radar radome transmits electromagnetic energy. Ensure that the radome hasbeen installed according to the recommendations given in this guide, and thatall personnel are clear of the radome before switching to transmit mode.When navigating, carefully compare information displayed on the unit to allavailable navigation sources, including information from visual sightings,and maps. For safety, always resolve any discrepancies or questions beforecontinuing navigation.••Use the electronic chart in the unit only to facilitate, not to replace, the useof authorized government charts. Official government charts and notices tomariners contain all information needed to navigate safely.Use this unit only as a navigational aid. Do not attempt to use the unit for anypurpose requiring precise measurement of direction, distance, location, ortopography.••WarningsWarnInG: This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. ThisNotice is provided in accordance with California’s Proposition 65. See www.garmin.com/prop65 for more information.WarnInG: Do not cut the fuse holder from the red wire. The fuse holder must remain in place for the Garmin radar to function correctly. Removing the inline fuse holdermay damage your boat's circuitry.CaUTIOn: Check with local authorities for any operational restrictions or licensing requirements that may apply while using this device.CaUTIOn: Do not use the GMR 600/1200 series radar on inland Belgium waters because the radars exceed authorized Belgian power transmission levels for inland waters.FCC ComplianceThe GMR 600/1200 series radar complies with Part 80 of the FCC rules. It has received a grant of equipment authorization, issued under theauthority of the FCC.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and the receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Industry Canada ComplianceThe GMR 600/1200 series radar complies with Industry Canada Standard RSS-138.Declaration of Conformity (DoC)Hereby, Garmin, declares that the GMR 600/1200 series radar is in compliance with the essential requirements and other relevant provisions ofDirective 1999/5/EC.To view the full Declaration of Conformity, see the Garmin Web site for your Garmin product: www.garmin.com.••••

/ 14

Related manuals for Garmin GMR 1200 SERIES