Garmin GMR 1204 Installation Instructions Manual

Contents

6 GMR 600/100 Series Installation InstructionsConnecting the Radar to the Garmin Marine NetworkFor a stand-alone network (chartplotter and radar only), attach the RJ-45 marine network cable to the RJ-45 socket on the back of thechartplotter. For an expanded network (including a chartplotter, radar, a GMS 10, etc.), attach the RJ-45 marine network cable to an open RJ-45socket on the GMS 10 network expander. Tighten the RJ-45 locking ring clockwise until it is firmly sealed.GMR 600/100 seriesradar Garmin Marine Network-compatible chartplotterStand-Alone Garmin Marine Network ExampleExpanded Garmin Marine Network Examplexxxxxxxx xxxxxxxxxxxxxxxxxxxGarminGPSMAP 000/5000series chartplotterGSD sounder unitTo transducerGarminGPSMAP 000 serieschartplotterGMS 10 marine network port expanderGDL 0/0AXM weather receiverGMR 600/100 seriesradarnOTe: Each component of the expanded network must be installed according to its installation instructions. These diagrams only show how aGMR 404/406 radar interacts with a network and do not show proper wiring for other network components.nOTe: Every device connected to the Garmin Marine Network must be connected to the power supply for the boat. These diagrams show thenetwork connections; however, they do not show the power connections. Wire each device according to the appropriate installation instructions.