Garmin GNS 430 Pilot's Manual And Reference

Also see for GNS 430: Specification Pilot's manual Instructions Pilot's guide addendum Pilot's guide addendum

Contents

Garmin GNS 430 Pilot's Manual And Reference Manual pdf 185 page image

GNS 430 Pilot’s Guide and Reference 10-27SECTION 10AUX PAGES3) Use the small and large right knobs to enterthe desired offset, beginning by entering aminus (-) or plus (+) sign to indicate whetherthe offset is behind UTC or ahead of UTC. (Inthe United States, all local time offsets useminus, or behind UTC.)4) Press the ENT Key to accept the selectedoffset.Restoring Factory SettingsWhen making changes to any Setup 1 Page option, a‘Restore Defaults?’ menu selection allows the pilot to restorethe original factory settings (for the selected option only).For example, with the Airspace Alarms Page displayed,the ‘Restore Defaults?’ option restores all Airspace AlarmsPage settings to the original factory values.To restore a Setup 1 option to the originalfactory settings:1) Select the desired menu option from theSetup 1 Page, using the steps described at thebeginning of this section.2) Press the MENU Key to display the Date/TimePage Menu (Figure 10-69).Figure 10-69 Date/Time Page Menu3) With ‘Restore Defaults?’ highlighted, press theENT Key.10.5 SETUP 2 PAGEThe Setup 2 Page (Figure 10-70) provides access (via‘menu options’) to display adjustments, parameters whichdefine the nearest airport search, and COM transceiverchannel spacing. When a menu option is selected, thecorresponding page appears providing access to thevarious unit settings.To select a menu option from the Setup 2Page:Figure 10-70 Setup 2 PageCurrent Page GroupMenu Options (to Select,Highlight with Cursor andPress the ENT Key)Position ofCurrent Pagewithin CurrentPage GroupNumber of Pages inCurrent Page Group1) Press the small right knob momentarily, toactivate the flashing cursor (Figure 10-70).