Garmin GNS 430 Pilot's Manual And Reference

Also see for GNS 430: Specification Pilot's manual Instructions Pilot's guide addendum Pilot's guide addendum

Contents

Garmin GNS 430 Pilot's Manual And Reference Manual pdf 217 page image

GNS 430 Pilot’s Guide and ReferenceAPPENDIX ADATA CARD USEA-1APPENDIX A: DATA CARD USEThe Jeppesen NavData card, and the Terrain DataCard (if applicable) supplied with the GNS 430 can beinstalled or removed when the GNS 430 is on or off. If theNavData card is not present when the unit is turned on, a‘No Jeppesen Aviation Database - Limited to user definedwaypoints’ message appears on the Database ConfirmationPage. If the NavData card is removed during operation,a ‘Data card removed - Unit will restart in 30 seconds’warning is displayed. A counter begins to count downand, if the card is not replaced within 30 seconds, theGNS 430 automatically re-initializes. Pressing the ENTKey will manually re-initialize the unit.Figure A-1 Data Card Slot LocationsTerrain DataCard Slot(right-hand slot)NavDataCard Slot(left-hand slot)NOTE: There are two data card slots on theface of the GNS 430 (Figure A-1). The JeppesenNavData card should be inserted in the left-handslot. The right-hand slot is provided for theTerrain Data Card.To insert the NavData or Terrain Data card(Figure A-2):1) Place the card into the appropriate card slot,with the label facing to the left and the swingarm handle at the bottom front.2) Press the data card into place until it seats onthe internal connector and the front of the cardis flush with the face of the GNS 430 unit.3) If the swing arm handle is up, gently lower thehandle and push it into place—flush with theface of the GNS 430 unit.Figure A-2 Data Card Insertion/Removal Detail