Garmin GNS 480 Installation Manual

Also see for Apollo CNX80: User Newsletter User Newsletter Supplemental Flight manual Pilot's guide Data list

Appendix C - Equipment CompatibilityGNS 480 (CNX80) Installation Manual560-0982-01 Rev -- C-1APPENDIX C - EQUIPMENT COMPATIBILITYC.1 ALTITUDE SOURCESThe following altitude sources are compatible with the GNS 480. Other altitude data sources may beused provided they meet the serial specifications defined in B.1.1 or provide the ARINC 429 labelsdefined in 2.8.10.2.1.Manufacturer Model Data Format NotesTrans-Cal SSD120 RS232 High resolution (10 ft) encoder (1200 baud)ICARUS 3000U RS232 Low resolution (100 ft) serializer (1200 baud)Sandia Aerospace SAE5-35 RS232 High resolution (10 ft) encoder (1200 baud)Garmin AT SL70 /SL70RRS232 If the SL70 is provided with gray code altitude from anystandard encoder, the SL70 will transmit altitude data(100 ft resolution) to the GNS 480. For the SL70,altitude data is provided to the GNX 480 on serial port 6configured for SL70.Garmin GTX 33 /GTX 330RS232 If the GTX 33/330 is provided with gray code altitudefrom any standard encoder, the GTX 33/330 willtransmit altitude data (100 ft resolution) to the GNS 480.For the GTX 33/330, altitude data is provided to theGNS 480 on serial port 6 configured for GTX33 ORGTX33+TIS. The GTX 33/330 must have softwareversion 3.06 or higher.B & D Instruments 90004 ARINC 429 Low-speedShadin 8800-M RS232 High resolution (1 ft) encoder (1200 baud)Shadin 8800-T RS232 High resolution (1 ft) encoder (9600 baud)C.2 FUEL/AIR DATA COMPUTERSThe following fuel/air data computers are compatible with the GNS 480. Other fuel/air data sources maybe used provided they meet the serial specifications defined in B.1.2.Manufacturer Model Data Format NotesShadin F/ADC-200F/ADC-2000DigiDataRS232 [1]Shadin Digiflo-LMiniflo-LMicroflo-LRS232 Fuel data onlyJP Instruments FS-450 RS232 Fuel data onlyJP Instruments EDM-700/800 RS232 Fuel Flow option (Fuel data only)[1] If it is desired to have the F/ADC calculate wind data, ground speed and track angle must be provided to theFADC using a GNS 480 MAPCOM RS232 output. If the MAPCOM data is not supplied to the FADC, theGNS 480 will calculate wind data using other data supplied by the FADC.