Installation ProceduresGNS 480 (CNX80) Installation Manual560-0982-01 Rev A 2-35Refer to section 3.2.1.2 for information on configuring the ARINC 429 inputs.2.8.10.2.2 ARINC 429 OutputsP5-4 429 OUT 1AP5-24 429 OUT 1BP5-5 429 OUT 2AP5-25 429 OUT 2BThe data output on the ARINC 429 output port depends upon the configuration (refer Table 2-10).Below is a list of the possible configurations and the labels output for each one.1. EFIS 429 (software version 1.2 and earlier)2. ARINC 429 (software version 1.3 and later)3. GAMA 429 No FP (software version 1.3 and later)4. VOR/ILS (software version 1.3 and later)5. ARINC 743A (software version 2.0 and later)NOTEThe GAMA 429 No FP configuration does not contain flight plan information.Table 2-10 - ARINC 429 Output LabelsLabel No. Parameter Name 1 2 3 4001 Distance To Go (BCD) ● ● ●002 Time To Go (BCD) ● ● ●012 Ground Speed (BCD) ● ● ●034G VOR/ILS Frequency (BCD) ●035G DME Frequency (BCD) ●041 Set Latitude (BCD) ●042 Set Longitude (BCD) ●074G Data Record Header ●075G Active Wpt From/To Data ●100 Selected Course 1 ● ●100G Selected Course 1 ●113G Message Checksum ●114 Desired Track (True) ● ● ●115 Waypoint Bearing (True) ● ● ●116 Cross Track Distance [Note 1] ● ●116G Cross Track Distance ●117G Vertical Deviation [Note 5] ● ●121 Horizontal Command (To Autopilot) ● ● ●125 Greenwich Mean Time (BCD) ● ● ●147G Magnetic Variation ● ●150 UTC (Binary)173 Localizer Deviation [Note 2] ●174 Glideslope Deviation [Note 3] ●204 Baro Corrected Altitude ● ●222 VOR Omnibearing (From aircraft to station) ●251 Distance To Go ● ●