Garmin GPS 155XL Pilot's Manual & Reference

Also see for GPS 155XL: Maintenance manual Installation manual Installation manual

SECTION2WPT KEYCreatingUser WaypointsSelecting a method to enter a new user waypoint.Entering the user waypoint’s exact position.45If the waypoint identifier entered does not exist, you will be prompted to select amethod to enter the new waypoint’s position into memory. If the waypoint exists (i.e.,you’re just reviewing or editing a user waypoint), skip step 4 and move on to the nextset of instructions.4. Select the desired waypoint entry method using O and press E.You will automatically be placed on the latitude and longitude field (if youselected ‘enter posn?’), the ‘from’ field (if you select ‘ref wpt?’) or the ‘bearing’ field (ifyou select ‘rng/brg from posn?’).To enter/edit the position of the user waypoint:1. Use K and O to enter the latitude. You may select either north or south and enter alatitude up to (but not including) 90°.2. Press E.3. Use K and O to enter the longitude. You may select either east or west and enter alongitude up to (but not including) 180°.4. Press E.Once the latitude and longitude have been entered, the cursor will move to thereference waypoint field, where you may enter a reference waypoint to calculate abearing and distance to the new waypoint position. If you are not entering a referencewaypoint:5. Press E to advance the cursor to the ‘ok?’ prompt and press E to save the newwaypoint in internal memory.