Garmin GPS 165TSO Pilot's Manual

Contents

If the GPS 165 is not currently navigating to awaypoint, ‘No actv wpt’ will be displayed in theCDI field.The GPS 165’s CDI page provides you with the important information needed tonavigate directly to your destination. The destination field, located at the bottom leftof the page, displays the current destination waypoint or active route leg being navi-gated. If no direct-to destination, route or approach is being navigated, the destina-tion field will display a dashed leg (____»_____).The graphical CDI at the top left of the page shows your position relative to thedesired course (the moving D-bar) to the destination waypoint. The TO/FROMarrow in the center of the scale indicates whether you are heading to (an up arrow)the waypoint or from the waypoint (a down arrow). Note that the GPS 165 alwaysnavigates TO a waypoint unless the GPS SEQ switch is set to the HOLD position oryou have passed the last waypoint in a route. The default setting of the CDI scale is5.0 nm. The CDI field is also used to display the GPS 165’s turn anticipation andwaypoint alert data during route and approach operations (See sections 3 and 4). Inaddition to displaying your active destination and the course deviation indicator, theCDI page features four selectable fields for various distance, direction and timeoptions. This allows you to configure the CDI page to your preferences. The defaultsettings displayed are ground speed, distance, track and estimated time enroute.8NAV KEYCDI PageThe CDI page with desired track and estimatedtime enroute displayed.CDI/Messages Field Ground Speed/Steer FieldTrack/TurnFieldDistance/Steer FieldActive Route Leg or Direct- ETE Field Displaying Track