Garmin GPS 165TSO Pilot's Manual

Contents

The route settings page allows you to select between automatic and manualroute sequencing and turn the automatic leg select feature on and off. Automaticroute sequencing changes the active leg of a route when the current leg is complete(you have reached the ‘active to’ waypoint). Automatic leg selection chooses theroute leg closest to your present position as the active leg. Whenever a GPS approachis armed, selected or the unit is powered down, the auto leg sequencing option willbe reset to the automatic setting.To change route settings (auto leg sequencing and auto leg selection):1. Press S and rotate O to highlight the ‘Route settings’ page.2. Press C and use K to turn the auto leg sequencing on or off.3. Rotate O to advance the cursor and use K to turn auto leg selection on or off.4. Press C when finished.If manual leg sequencing is selected, you must manually advance the active routeto the next waypoint after completing each route leg. Manual leg sequencing can alsobe used with the GPS SEQ switch to dial in the desired inbound course to the nextroute waypoint from your HSI.To manually sequence the active route legs:1. Press R and use O to display the active route page.2. Press C and rotate O to highlight the waypoint.3. Press D. Press E to confirm the waypoint.4. The GPS 165 will change the leg of the active route, making the selected waypoint the‘active to’ waypoint.87UNIT SETTINGSRoute Settings PageWhenever a GPS approach is armed, selected orthe unit is powered off, the automatic waypointsequencing option will be reset to the on position.Route settings with automatic leg selection off.