3-42 GPS 175/GNX 375 Pilot’s Guide 190-02207-02 Rev. BNavigation3.13.3 Navigating Direct ToWhile most direct-to operations follow the same basic steps, the method forselecting a waypoint may vary.DIRECT TO A NEW WAYPOINT1. Tap Direct To.2. Select a waypoint identifier.3. Tap Course and specify the course heading (if a specific course is necessary).4. Activate the selection.DIRECT TO A FLIGHT PLAN WAYPOINTDIRECT TO THE NEAREST AIRPORT1. Tap Direct To.2. Select NRST APT tab.3. Select an airport.4. Activate the selection.DIRECT TO A MAP WAYPOINTYou can modify direct-to routes on Map using the Graphical Edit function thesame as you would a flight plan.Flight Plan WaypointsIf a flight plan exists, waypointsequencing resumes once youreach the direct-to waypoint. Ifthe waypoint is not in the flightplan, the flight plan is no longeractive but remains available.Direct To options are not available for allflight plan entries. Some entries includeholds and course reversals which are notselectable using Direct To.1. Tap Direct To.2. Select FPL tab.3. Select a flight plan leg.4. Activate the selection.MAPWPTFor map locations without anexisting name, Direct To assignsthe “MAPWPT” identifier.Bearing, distance, and mapcoordinates display on theWaypoint tab.Apply a direct-to course to any locationon the map.1. Tap a location on Map.2. Tap Direct To.3. Activate the selection.
