3-62 GPS 175/GNX 375 Pilot’s Guide 190-02207-02 Rev. BNavigation3.19 DeparturesFEATURE LIMITATIONS• Vector-only departures are not available in the Procedures databasePAGE SPECIFIC CONTROLSSELECT A DEPARTUREFrom the Home page:1. Tap PROC > Departure.2. Confirm the selected airport. If necessary, tap Airport and choose an airportusing the provided search options.3. Tap Departure > Select a departure from the list.4. Tap Transition > Select a transition.5. Tap Runway > Select a runway.6. Tap Preview > Review the departure diagram and sequence list.7. Tap Load Departure. The Active FPL page opens.8. Scroll the flight plan to view all departure waypoints.Loading a Departure into Flight Plan• Always load the departure at the departure airport in the flight plan• Flight plans allow only one departure procedure at a time• Loading a departure when one is already present will replace the existing entry• Selecting a departure, transition waypoint, and runway defines the routeLoad Departure: Loads departureprocedure into the active flight plan.Activate Departure: Activates theloaded departure procedure.Remove Departure: Removes theloaded departure procedure.To change or remove the departure:• Tap the existing flight plandeparture• Select a different one.OR• Tap Remove Departure.
