Garmin GPS 400 Pilot's Manual & Reference

Also see for GPS 400: Instructions Pilot's guide addendum Pilot's guide addendum Pilot's guide addendum Maintenance manual

Contents

Garmin GPS 400 Pilot's Manual & Reference Manual pdf 114 page image

GPS 400 Pilot’s Guide and Reference 190-00140-60 Rev. H6-12SECTION 6WPT PAGES6.7 AIRPORT DEPARTURE PAGEThe Airport Departure Page (Figure 6-26) shows theavailable Airport Standard Instrument Departure (SID)procedures for the selected airport. Where multiplerunways or transitions are associated with the departureprocedure, that information may also be displayed. Amap image provides a layout diagram for each departure,runway, and transition.Figure 6-26 Airport Departure PageAirport Identifier,Symbol, and Type Map Image DepartureProcedureNameTransitionsRunwaysassociated withDeparturePosition of Current Pagewithin Current Page Group Number of Pages inCurrent Page GroupCurrentPage GroupScrolling through the available departures:1) Press the small right knob to activate thecursor.2) Turn the large right knob to place the cursoron the departure (DEP) procedure name field(Figure 6-26).3) Turn the small right knob to display a windowof available departures for the selected airport(Figure 6-27). Continue turning the small rightknob to select the desired departure.Figure 6-27 Departure Window4) Press the ENT Key. The cursor moves to therunway field.5) Turn the small right knob to display a windowof available runways (Figure 6-28). Continueturning the small right knob to select thedesired runway. ‘ALL’ may appear in therunway field, indicating the departure procedureapplies to all runways. For airports with parallelrunways, ‘B’ may appear at the end of therunway designation to indicate the departureprocedure applies to both runways.Figure 6-28 Runway Window6) Press the ENT Key. The cursor moves to thetransitions (TRANS) field.7) Turn the small right knob to display a windowof available transitions. Continue turningthe small right knob to select the desiredtransition.8) Press the ENT Key. To remove the flashingcursor, press the small right knob.