Garmin GPS III Owner's Manual

Also see for GPS III: Declaration of conformity Quick guide Owner's manual Owner's manual

Garmin GPS III Owner's Manual Manual pdf 96 page image

The GPS III Pilot can be mounted on any flat surface using the two Velcro™ stripsprovided in the standard package, or you can use the supplied mounting bracket.To mount the GPS III Pilot using the Velcro strips:1. Select a location for the unit that provides a clear and unobstructedview of the sky for the GPS antenna, but will not obstruct your fieldof view while flying.2. Make sure the surface to which you’re adhering the Velcro is cleanand dry. Remove the paper liners from both Velcro pieces.3. Place the adhesive side of the rough piece of Velcro on the desiredmounting surface, and press into place.4. Place the adhesive side of the smooth piece of Velcro on the bottomof the unit (between the rubber anti-skid bumps), and press into place.5. Mount the unit, placing one piece of Velcro on top of the other.To mount the GPS III Pilot using the bracket:1. Select a location for the unit that provides a clear and unobstructedview of the sky for the GPS antenna, but will not obstruct your fieldof view while flying.2. Make sure the surface to which you’re adhering the Velcro is cleanand dry. Remove the paper liners from both Velcro pieces.3. Place the adhesive side of the rough piece of Velcro on the desiredmounting surface, and press into place.88APPENDIX AMounting Instructions