RoutesThe last way to navigate to a destination is to create a user-defined route. The Garmin GPSMAP172/172C system lets you create and store up to 50 reversible routes (numbered 1-50), with up to 50waypoints each. Routes can be created and modified in two ways. The first way is to ‘Edit on Map’ fromthe Route Edit map page, allowing you to see each route graphically on-screen as you create, review, ormodify the route. The second way is to ‘Edit as Text’ from the Route Review page, allowing you to seea list of the waypoints as you create, review, or modify the route. All of the GPSMAP 172/172C’s routefunctions are accessed through the Main Menu page or the NAV key.To create a route graphically from the Route Edit map page:1. Press the MENU key twice to display the Main Menu page. Use the ARROW KEYPAD to highlightthe ‘Route’ tab.2. Press the MENU key to display the route options page. Select ‘New Route’ and press ENTER.Or, highlight the first available blank slot in the Route List and press ENTER.3. To add an existing waypoint or map item to the route, use the ARROW KEYPAD to highlightthe desired waypoint or map item on screen and press ENTER. Map items do not appear in thewaypoint list. To create a waypoint from a map item, see page 13.4. To add a new waypoint to the route, use the map cursor to select the desired map position andpress ENTER. Press ENTER again to confirm the new waypoint. You may also change the name,symbol and other properties of the new waypoint (see pages 34).As you add each new waypoint to the route, the data window at the top of the map display showsthe waypoint/map item name, bearing and distance from your location, and coordinates of thecursor. The bottom of the display shows you the number of available and used points. A route lineappears on the map to indicate each completed leg, and a dotted line appears to indicate thedistance and bearing to the arrow cursor from the last route waypoint.5. Repeat steps 3 and 4 until you have finished defining all route waypoints.6. When finished press QUIT twice to return to the Route List page; or press MENU, highlight ‘Edit asText’ and press ENTER to return to the Route Review page.Main Menu—Route Tab andRoute Options MenuYou see ‘ADD’ below thecursor as you add points.ReferenceCreating Routes