Garmin GPSMAP 182 Owner's Manual

Also see for GPSMAP 182C: Owner's manual Declaration of conformity Declaration of conformity Specifications

Garmin GPSMAP 182 Owner's Manual Manual pdf 49 page image

39ReferenceTracBack NavigationTo save a track log:1. From the Main Menu, use the ARROW KEYPAD to highlight the ‘Track’ tab, then highlight the‘Active’ tab to the right.2. Use the ARROW KEYPAD to select the ‘Save’ option and press ENTER/MARK.3. From the ‘Save Back Through’ window, highlight the desired time, date, or ‘Entire Log’ and pressENTER/MARK.4. Next, the track will begin saving and then display the ‘Saved Track’ window when done. The defaultname, distance and number of points (500 max) will be displayed.5. To change the name of the saved track, highlight the name field and press ENTER/MARK, makeyour changes and press ENTER/MARK again. You may also choose a style (monochrome units) orcolor (color models) that will be used to display the saved track line. If you wish for the saved trackto be displayed on the Map and Highway page, highlight the check box to the left of ‘Show on Mapand Highway’ and press ENTER/MARK. Highlight ‘OK’ and press ENTER/MARK to save the track.To activate a TracBack using the NAV key:1. Press the NAV key, then highlight the ‘Follow Track’ option and press ENTER/MARK.2. Highlight the track you wish to follow and press ENTER/MARK.3. Choose either ‘Original’, which will navigate you from the start to the end of your trip, or ‘Reverse’,which will navigate you from the end to the start of your trip and press ENTER/MARK.Once a TracBack has been activated, the GPSMAP 182/182C/232 will take the track log currentlystored in memory and divide it into segments called ‘legs’. Up to 50 (254 on 182C) temporary ‘turns’(BEGIN, TURN 1, TURN 2, TURN 3,...., TURN X, END) will be created to mark the most significantfeatures of the track log in order to duplicate your exact path as closely as possible. To get the most outof the TracBack feature, remember the following tips:• Always clear the track log at the point that you want to go back to (dock, etc.).• The ‘Record Mode’ option on the track log setup page must be set to ‘Fill’ or ‘Wrap’.• There must be at least two track log points stored in memory to create a TracBack route.Default Track nameCheck this box todisplay trackAdditional optionsTotal DistanceTotal number of pointsYou must first savea track before usingthe ‘Follow Track’option.Change color orstyle of track line