Garmin GPSMAP 276C Owner's Manual

Also see for GPSMAP 276C: Owner's manual Owner's manual Owner's manual Quick reference guide Declaration of conformity

Contents

Learning About GPSThe Global Positioning System (GPS) is a satellite-based navigationsystem made up of a network of 24 satellites placed into orbit by theUnited States Department of Defense.GPS was originally intended for military applications, but in the1980s, the government made the system available for civilian use.GPS works in any weather conditions, anywhere in the world, 24hours a day. There are no subscription fees or setup charges to useGPS. For more information see the Garmin Web site and read theGPS Guide for Beginners, which is found on the Web site athttp://www.garmin.com/aboutGPS/manual.html.Common GPS TermsInitialization—the first time a GPS receiver orients itself to itscurrent location and collects data. After the receiver is initialized, itremembers its location and acquires a position more quickly.Position—an exact, unique location based on geographiccoordinates (Latitude and Longitude).Route—A group of waypoints entered into the GPS receiver in thesequence you want to navigate them.Waypoint—a location you store in your GPS. It might be acheckpoint on a route or a significant ground feature, such as yourcampsite or favorite fishing spot.What is Differential GPS (DGPS)?The United States and Canadian governments (among others) haveset up Differential GPS (DGPS) stations to transmit correctionsignals. They are operational in coastal areas and on many navigableriver systems.The DGPS system is available for use without a fee, but you do needadditional equipment to receive DGPS signals; a beacon receivercompatible with the RTCM format sentences supported by yourGarmin GPS is needed to use DGPS.Refer to the United States Coast Guard’s Web site(http://www.navcen.uscg.gov/) for locations and status of thedifferential stations.Differential FieldDifferential receiver status is indicated in the bottom left field of theGPS tab and will show one of the following conditions:• None—no optional beacon receiver is attached or enabled inthe Interface sub tab on the Main Menu—Setup tab or WAASis disabled.• Searching for WAAS—WAAS is enabled and the receiver issearching for WAAS signal.• Using WAAS—WAAS capability is enabled and the unit isreceiving WAAS corrections.GPSMAP 276C Owner’s Manual 107APPENDIX > L EARNING ABOUT GPS