Garmin GPSMAP 3005C - Marine GPS Receiver Owner's Manual

Also see for GPSMAP 3005C: Installation instructions Installation instructions Owner's manual Quick reference guide Template manual

Contents

GPSMAP 3005C Owner’s Manual bAsIc oPerAtIon > revIewIng And edItIng wAyPoIntsTo access the Points tab from the Main Menu:1. Press and hold ADJ/MENU to open the Main Menu.2. Use the ROCKER to highlight the Points tab, and highlight either the Useror Proximity sub tab.Sub tabsUser WaypointsThe User sub tab on the Points tab shows a master list of all waypoints currentlystored in memory. From the User sub tab, you can review, edit, rename, or deleteindividual waypoints, or delete all user waypoints. The number of available andused waypoints are shown at the bottom of the User sub tab. Stored waypoints arearranged in alphanumeric order.To scroll through and review the waypoint list:1. Use the ROCKER to highlight the Points tab on the Main Menu, and thenhighlight the User sub tab.2. Press up or down on the ROCKER to scroll through the list of waypoints;press right or left on the ROCKER to scroll by page.3. Press ENTER to review the highlighted waypoint on the Review WaypointPage.4. Press the Next soft key to return to the waypoint list. The next waypoint inthe list is automatically highlighted.Deleting WaypointsThe following soft keys are available when you highlight a waypoint on the Usersub tab:• New Waypoint—creates a new waypoint.• Delete—deletes the selected waypoint from the list, and from any route inwhich the waypoint was used.• Del by Smbl—deletes waypoints that use the same symbol.• Delete All—deletes all waypoints from the unit.NOTE: When you delete a waypoint from the list, it cannot be recovered fromthe unit. Save important waypoints to a data card, or write them down.To delete a single waypoint from the User sub tab:1. Use the ROCKER to highlight the waypoint you want to delete, and thenpress the Delete Waypoint soft key. A confirmation message appears.2. Highlight OK, and press ENTER to delete the selected waypoint.To delete waypoints by symbol:1. On the User sub tab, highlight the waypoint you want to delete.2. Press the Delete By Symbol soft key.basIcoperatIon