Garmin GPSMAP 3005C - Marine GPS Receiver Owner's Manual

Also see for GPSMAP 3005C: Installation instructions Installation instructions Owner's manual Quick reference guide Template manual

Contents

GPSMAP 3005C Owner’s Manual 5bAsIc oPerAtIon > creAtIng And usIng routesCreating a Quick NAV RouteUse the Create QUICK soft key to create a quick route that you can beginnavigating immediately.To create and navigate a QUICK NAV route:1. Press NAV/MOB, and highlight Follow Route.2. Press the Create QUICK soft key.3. Use the map pointer to select a waypoint or map item, and press ENTER.As you add each new waypoint to the route, the data window at the top ofthe Map Page shows the waypoint/map item name, bearing and distancefrom your location, and coordinates of the map pointer. The bottom of thescreen shows the number of available points. A route line appears on themap to indicate each completed leg, and a dotted line appears indicatingthe distance and bearing to the arrow pointer from the last route waypoint.4. Repeat step 3 until you finish adding all route waypoints.5. Press QUIT twice to start your QUICK NAV route.Copying a RouteUse the Copy soft key on the Route tab to copy an existing route.To copy a route:1. Press and hold ADJ/MENU to open the Main Menu, and then highlight theRoutes tab.2. Use the ROCKER to select the route you want to copy, and press theCopy soft key. The map window for the new route opens. The copiedroute uses the same route name with an additional number (starting at 1)at the end of the route name.Deleting a RouteUse the Route tab on the Main Menu to delete an individual route or delete allroutes.To delete an individual route:1. Press and hold ADJ/MENU to open the Main Menu, and then highlight theRoutes tab.2. Use the ROCKER to select the route you want to delete, and then pressthe Delete soft key. A confirmation message appears.3. Press the OK soft key to delete the route.To delete all routes:1. Press and hold ADJ/MENU to open the Main Menu, and then highlight theRoutes tab.2. Press the Delete All soft key. A confirmation message appears.3. Press the OK soft key to delete all routes.Editing a RouteAfter you create or copy a route, use the Route tab to add, edit, or delete pointsfrom a route or rename a route.To change the name of a route:1. On the Routes tab, highlight the route you want to edit, and press ENTER.The map window opens showing the selected route.2. Press the Rename Route soft key. The first character in the EditingRoute field is highlighted.basIcoperatIon