GPSMAP 3205 Owner’s Manual 3M aIn Menu > networK tabTo set up the Advanced NMEA Page:1. Press the NMEA Setup soft key to open the Advanced NMEA Setup Page.2. To change, enable, or disable NMEA output sentences, highlight the sentence, andpress ENTER to select or clear the check box. Only selected sentences are output.Update Sub TabThe Update sub tab shows the status of any software you are uploading to your unit.The Update sub tab contains the following soft keys:• Update—updates software on your unit.• Prepare Card—updates software for devices on the Garmin Marine Network.When selected, information about your network installation is collected andsaved to a data card. Use the data card with Marine Updater on your personalcomputer to download software updates for your system. Using Marine Updater,you can put all of the software updates on a data card. When you put the datacard into the unit it will update the software for all devices on the network. Checkthe Garmin Web site (www.garmin.com) for future updates and announcements.Network TabThe Network tab shows all devices connected to the GPSMAP 3205 and theGarmin Marine Network, and the status of each. You can assign a name oridentifier to each device on your network.To check the status of a device:Use the ROCKER to highlight the device. The status of the network deviceis shown in the Status window.To assign a name to a device on the network1. Use the ROCKER to highlight the device, and then press ENTER tohighlight the Name field.2. Use the ROCKER to enter a name for the device.3. Press ENTER when finished.NOTE: The GPSMAP 3205 connects to a GPSMAP 4000/5000 series butcannot share cartography.
