Garmin GPSMAP 3205 Owner's Manual

Also see for GPSMAP 3205 - Marine GPS Receiver: Installation instructions Installation instructions Quick reference guide Owner's manual Template manual

Contents

Garmin GPSMAP 3205 Owner's Manual Manual pdf 14 page image

6 GPSMAP 3205 Owner’s ManualGETTING STARTED > U SING SIMULATOR MODESetup Sub TabThe GPS Setup Tab contains the following options:Skyview Orientation—allows you to select a sky view display, either North Upor Track Up, for the GPS Info sub tab only.Source—set to Garmin when using a Garmin sensor (GPS 17); set to NMEAwhen using any other GPS NMEA source.WAAS—toggles the WAAS capability of the Garmin receiver on or off.The following soft keys are active only when the unit is not receiving satellitesand the Source is not set to Garmin:• AutoLocate—allows the receiver to find your location automatically. Thisprocess can take up to five minutes.• Set Position—allows you to initialize the receiver graphically or manuallyfrom the Map Page to initially help the receiver acquire satellites morequickly.Using Simulator ModeSimulator Mode is great for practicing with the unit while inside and satellitesignals are not available. When the GPSMAP 3205 is in Simulator Mode, theGPS receiver is turned off. The unit cannot be used for actual navigation.NOTE: Do not try to navigate in Simulator Mode. While in Simulator Mode,the GPS receiver is turned off. Any satellite signal strength indicators shownare only simulations and do not indicate the strength of actual satellite signals.To turn on Simulator Mode:1. Press and hold ADJ/MENU to open the Main Menu.2. Press up or down on the ROCKER to highlight the System tab.3. Press right on the ROCKER to highlight the General sub tab, highlight theSystem Mode field, and press ENTER.4. Highlight Simulator, and press ENTER.When Simulator Mode is active, the message “Simulating Operation” appears inthe status bar at the top of each page.