Garmin GPSMAP 3205 Owner's Manual

Also see for GPSMAP 3205 - Marine GPS Receiver: Installation instructions Installation instructions Quick reference guide Owner's manual Template manual

Contents

Garmin GPSMAP 3205 Owner's Manual Manual pdf 28 page image

20 GPSMAP 3205 Owner’s ManualBASIC OPERATION > N AVIGATING TO A DESTINATIONTo initiate a Go To from a point list:1. Press NAV.2. Highlight Go To Point, and press ENTER. The Find From Current PositionPage opens.3. Highlight Waypoints, and press ENTER. (You can also choose to go toother points from this list, such as cities or tide stations.)4. Select a waypoint from the By Name or Nearest tab list, and pressENTER to open the Review Waypoint Page for the selected waypoint.5. Press the Go To soft key to begin navigation. A magenta line appears onthe map display showing the course from your current location to theGo To point.To stop navigation:1. Press NAV.2. Highlight Stop Navigation, and press ENTER.Selecting a Go To Destination GraphicallyA graphical Go To can be used to select one of three items from the mapdisplay—an existing waypoint, on-screen map items such as rivers, cities,navaids, or a new map point. If you select a map item as the Go To destination,the GPSMAP 3205 automatically uses the name of the map item, but the pointis not stored in the waypoint list. If you select a new map point (non-map item)as the Go To destination, the GPSMAP 3205 automatically creates a waypointnamed MAP at the pointer location.To Go To an existing waypoint or map item from the map display:1. Use the ROCKER to highlight the waypoint or map item you want tonavigate to on the Map Page, and press NAV.2. On the Navigation menu, highlight Go To , and pressENTER.To Go To a new map point (non-map item) from the map display:1. Use the ROCKER to move the pointer to the location you want, and pressNAV.2. With Go To MAP Point highlighted, press ENTER.To stop navigation:1. Press NAV.2. Highlight Stop Navigation, and press ENTER.Follow Track and TracBack NavigationA track is an electronic breadcrumb trail recording or history of your path. Thetrack currently being recorded is the “active” track. An active track can be storedin the unit and when stored, is referred to as saved. Both the Follow Track andTracBack options navigate in the same way. Follow Track uses stored or “saved”tracks; TracBack uses your current or “active” track.