Garmin GPSMAP 3205 Owner's Manual

Also see for GPSMAP 3205 - Marine GPS Receiver: Installation instructions Installation instructions Quick reference guide Owner's manual Template manual

Contents

Garmin GPSMAP 3205 Owner's Manual Manual pdf 18 page image

10 GPSMAP 3205 Owner’s ManualBASIC OPERATION > U SING THE GPSMAP 3205See your Garmin dealer or visit the Garmin Web site (www.garmin.com) formore information on available pre-programmed Garmin data cards and otherMapSource programs to increase the mapping capability of your new chartplotter.Using the Map PointerUse the map pointer to pan away from your current location and scroll to othermap areas around the world (even outside of your current detail coverage). Asyou pan past the edge of the current map display, the screen actively scrollsforward to provide continuous map coverage. An hourglass symbol appears bythe pointer while the unit is busy drawing new map detail.Controlled by the ROCKER, the map pointer is an important tool that can beused to pan to other map locations, mark and edit waypoints and routes, andreview location data of on-screen map items and waypoints.Map item name, pointer coordinates,distance, and bearingMappointerTo move the map pointer:Press the ROCKER to move the map pointer in an up, down, left, right, ordiagonal direction.As you move the map pointer, the distance and bearing from your currentlocation to the map pointer are shown in the upper-left corner of the map, withthe map pointer’s location coordinates. Keep in mind that when the map pointeris stationary, the distance and bearing from your present location changes as yourboat moves. The map pointer can also be used to snap to on-screen waypointsand map items, allowing you to review a selected location directly from the mapdisplay.To select an on-screen waypoint or map item with the map pointer:1. Use the ROCKER to move the pointer to the waypoint or map item. Whena waypoint or map item is selected, it is highlighted on-screen with thename and location shown.2. Press ENTER to show details of the map item. When using BlueChart orMapSource data, or if waypoints are grouped tightly together due to theRange setting, additional tabs appear on the Review Waypoint Page. Usethe ROCKER to highlight the individual tabs to show the information andadditional options.