Using xImage for Customized Waypoint SymbolsxImage allows you to exchange images between your PC and yourGPSMAP 396. You can download and save screen shots of anyscreen shown on your unit. xImage also allows you to downloadcustomizable splash screens and waypoint symbols from compatibleGPS units, customize them (if you have an image editing programon your PC), and send them back to your GPS unit.You can download xImage from the Garmin Web site athttp://www.garmin.com/ximage/. Refer to the help file for completeinstructions about using xImage.Installing and Removing Data CardsThe GPSMAP 396 uses an optional Garmin data card to showdigital charts and maps. Install the data card in the slot located onthe bottom of the unit. Install or remove the data card at any time,whether the unit is on or off.You can load a variety of information on your data card, such asBlueChart and MapSource detailed maps in a MapSource program.You can buy pre-programmed cards to use with your GPSMAP 396.Data cards are not waterproof, should not be exposed to moisture orexcessive static charges, and should be stored in the case suppliedwith the card.To install a data card:1. Insert the card into the slot on the bottom of the unit. Be surethe label is facing the front of the unit.2. Firmly push the card into the unit. It is not necessary to forcethe card. The handle is still exposed when it is properlyinserted.3. If the unit is on, a confirmation tone sounds. The first timeyou insert a programmed data card, the unit takes a fewseconds to read the card. When the data card has beenproperly installed and accepted, a summary screen notingthe card details appears. Press ENTER to acknowledge.If you insert a data card and get a card format not recognizedmessage, try removing the card and reinserting it. If the card is stillnot recognized, contact Garmin Product Support or your Garmindealer.To remove a data card:1. Grasp the card handle. The handle expands for easyremoval.2. Pull the card out of the card slot on the bottom of the unit.3. If the unit is on, a confirmation tone sounds when the datacard has been removed.GPSMAP 396 Pilot’s Guide 161APPENDIX > INSTALLATION INFORMATION
