Creating a Direct ToIn Aviation Mode, press Direct To to select a destination. Whena Go To or route is currently in use, holding Direct To downbriefly shows a detailed information page for the current destination.In Marine or Automotive Mode, pressing Direct To shows theNavigate menu, which allows you to start navigation or edit a route.Also, in Marine Mode, pressing Direct To twice creates a MOBwaypoint and starts navigating to that point.Press MENU on any tab of the Go To Page to open an options menufor that tab. Based on the tab you selected, you can Show Details,Select Approach, Select Route, Find Land Points, and RemovePoint.Go To Page: Aviation TabAirportIdentifierFacilityNameCityTo go to an airport or navaid:1. Press the Direct To to show the Go To Page. Use theROCKER to show the Aviation tab.2. Press up or down on the ROCKER to select the identifier,facility name, or city field, and press ENTER.3. Use the ROCKER to ENTER the word to search for. Pressup and down to change the highlighted character and rightto move to the next character field. As you scroll throughthe characters the GPSMAP 396 shows database entrieswith the same characters you have entered to that point. Ifmore than one entry exists in the database for the charactersyou have entered, a window appears. Use ENTER and theROCKER to select the point.4. Press ENTER when the point is shown.5. With the on-screen Go To button highlighted, press ENTER.The GPSMAP 396 creates a course from your presentlocation to the selected destination.14 GPSMAP 396 Pilot’s GuideBASIC OPERATION IN AVIATION MODE > C REATING A DIRECT TO
