Setting Up the Panel PageYou can set the bug indicator and change the CDI scale to suit yourneeds.To set a user-defined bug heading reference:1. With the Panel Page appears, press MENU to show thePanel Page options menu.2. Highlight Set Bug Indicator, and press ENTER.3. Highlight User Selected, and press ENTER. A windowappears at the center of the HSI, showing the current bugindicator setting.4. Select the heading reference by pressing left or right on theROCKER. Press ENTER. The bug indicator remains fixed onthe selected heading until a new bug heading is chosen.To change the CDI scale:1. With the Panel Page shown, press MENU to show the PanelPage options menu.2. Use the ROCKER to highlight Set CDI Scale, and pressENTER. A window appears at the center of the HSI, showingthe scale settings. The current setting is highlighted.3. Use the ROCKER to select the scale, and press ENTER.Manually Setting a CourseUse the Set OBS and Hold option to manually set your course tothe destination.To manually set a course to the destination waypoint:1. With the Panel Page shown, press MENU to show the PanelPage options menu.2. Highlight Set OBS and Hold option, and press ENTER. AnOBS data field appears on the screen. Keep in mind that youmust have a destination waypoint selected.3. Select the OBS course by pressing the ROCKER left andright. Press ENTER. The course deviation needle andcourse pointer now provide steering guidance to the selectedcourse.To release the waypoint hold and return to automaticsequencing of route waypoints, press MENU. HighlightRelease Hold, and press ENTER.To cancel the OBS course and reset a direct course to thewaypoint, press Direct To, highlight Resume Route, andpress ENTER to re-start the route.40 GPSMAP 396 Pilot’s GuideAVIATION MODE PAGES > PANEL PAGE
