Garmin GPSMAP 4010 Owner's Manual

Also see for GPSMAP 4008 - Marine GPS Receiver: Technical reference Important safety information Owner's manual Supplement Owner's manual

Contents

Garmin GPSMAP 4010 Owner's Manual Manual pdf 36 page image

32 GPSMAP ® 4000/5000 Series Owner’s ManualConfiguring the ChartplotterConfiguring theChartplotterConfiguring the ChartplotterUse the Configure screen to configure unit settings.Configuring System SettingsTo change general system settings from the Home screen, select Configure > System.Simulator—turn Simulator Mode On or Off. Select Setup to set simulator options. (If you set theunit into a Store Demonstration mode during the initial unit setup, this setting is named Demo.)Auto Power Up (GPSMAP 4010 and GPSMAP 5015 only)—turn Auto Power Up On or Off. WhenOn is selected, the chartplotter will automatically turn on whenever power is applied, unless thechartplotter is turned off with the Power key before power is lost.Beeper/Display—select Beeper to set when the unit makes audible sounds. Select Backlight tobrighten or darken the backlight. Select Color Mode to switch between Day Mode and Night Mode.Select Screenshot Capture to turn the screenshot capture feature on or off (page 54).GPS—view GPS satellites.System Information—view system information, reset factory settings, view the status of networkeddevices, and display the event log. The event log displays a list of system events. Select the eventto view additional information. The Save to Card button is provided as a troubleshooting tool; aGarmin Product Support representative may ask you to use this to retrieve data about the marinenetwork.Radar Diagnostics (if radar is connected)—a troubleshooting tool used by installers.Changing the System LanguageTo change the system language, from the Home screen, select Configure > Preferences >Language and then select the language.Configuring Navigation PreferencesTo change navigation preferences, from the Home screen, select Configure > Preferences >Navigation.Route Labels—for saved routes, this determines whether route turns are indicated by number (Turn1, Turn 2, and so on) or by waypoint name, or whether the description of turns is hidden.turn transition—set how much time or how far before a turn in a route that you transition to thenext leg. Raising this value can help improve the accuracy of the autopilot when navigating a routeor automatic-guidance line with many frequent turns or at higher speeds. For straighter routes orslower speeds, lowering this value can improve autopilot accuracy.Speed Sources—specify the sensor used for Wind numbers and Fuel Economy. Touch Wind or FuelEconomy to toggle between Water (from a water-speed sensor) and GPS (from the calculated GPSspeed).