Garmin GPSMAP 4010 Owner's Manual

Also see for GPSMAP 4008 - Marine GPS Receiver: Technical reference Important safety information Owner's manual Supplement Owner's manual

Contents

Garmin GPSMAP 4010 Owner's Manual Manual pdf 48 page image

44 GPSMAP ® 4000/5000 Series Owner’s ManualUsing RadarUsingRadarTo customize safe-zone settings:1. From the Radar screen, select Menu > Other Vessels > Collision Alarm.2. Select from the following options:Range—change the measured radius of the safe zone ring to a specified distance from 500 ft.to 2.0 nm (or from 150 m to 3.0 km, or from 500 ft. to 2.0 mi).Time to (Safe Zone)—sounds an alarm if AIS or MARPA determines that a target will intersectthe Safe Zone within the defined time interval (ranging from 1 to 24 minutes).Display Setup—configure how other vessels are displayed on the Radar screen.Display Range—set the distance from your location that AIS vessels are displayed.Details—show or hide details for each vessel.Proj. Heading—set the projected heading time.trails—set the number of minutes that trails for vessels that you are position tracking (page 51)are displayed on the Radar screen, or turn trails off.Advanced Radar ConfigurationTo access advanced radar settings, from the Radar screen, select Menu > Radar Setup.Rotation Speed (GMR 18/24/404/406 series models only)—set the rotation speed of your radar toNormal Speed or High Speed. High Speed increases the speed at which the antenna rotates, whichincreases the speed at which the screen updates.Front of Boat—offset the front of the boat if you mount the radar at an angle.Data Bars—show or hide cruising, navigation, fishing, fuel, or sailing numbers (page 9).Appearance—configure radar display options.Color Scheme—change the colors used for the radar display.Orientation—change the perspective of the radar display.Look-Ahd Spd—turn on to shift your current location toward the bottom of the screen as yourspeed increases. Enter your top speed for the best results.Heading Line—show or hide a line in the direction of travel.Rings—show or hide the radar range rings.Nav Lines—show or hide a colored line that indicates the route you are currently navigating.Waypoints—show or hide waypoints that are within the range displayed on the Radar screen.Select Navigation Only to only display waypoints associated with the currently active route.•••••••••••••