Garmin GPSMAP 60C Owner's Manual

Also see for GPSMAP 60C: Owner's manual

Contents

77GPSmap 60CInterface Wiring DiagramAppendicesInterface formats are selected from the Interface Setup on page 44 ofthis manual. The input/output lines on your GPSmap 60C are RS-232compatible, allowing easy interface to a wide range of external devices,including PC’s, differential beacon receivers, marine autopilots and /or asecond GPS receiver.The NMEA 0183 version 3.0 interface format is supported by theGPSmap 60C and enables the unit to drive up to three NMEA devices.NMEA 0183 Version 3.0 Approved Sentences:GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG,GPWPL, GPBODGarmin Proprietary Sentences:PGRME (estimated error), PGRMM (datum string), PGRMZ (altitude),PSLIB (beacon receiver control)DGPS (Differential GPS) corrections are accepted in RTCM SC-104version 2.0 format through the ‘Data In’ line. The Garmin GBR 21 andGBR 23 are the recommended beacon receivers for use with the GPSmap60C. Other beacon receivers with the correct RTCM format may be used,but may not correctly display status or allow tuning control from the GPSunit.The USB Interface Cable provided withthis unit allows you to connect your GPSmap60C to a PC-compatible computer’s USB port.Cable Plug End View(-) GroundData OutData In(+) Power()()()()