98 GPSMAP 60CSx Owner’s ManualAPPENDIX >To set up Loran TD from the Setup Menu:1. Press MENU twice to open the Main Menu.2. Use the ROCKER to highlight the Setup icon,and press ENTER to open the Setup Menu.3. Use the ROCKER to highlight the Locationicon, and press ENTER to open the LocationSetup Page.4. Highlight the Position Format field, and pressENTER to open the format list.5. Highlight Loran TD, and press ENTER to openthe Loran Setup Page.6. To change the settings of any of the five fields,highlight the field, press Enter to select fromoptions or enter the setting data.7. When finished, highlight the Save button, andpress ENTER.If the active GRI Chain, secondary stations, or offsetshave been changed since the waypoint was created,the waypoint references the active GRI-chain andsecondary stations and adjust the TD coordinatesaccordingly. Remember that the GPSMAP 60CSxis not relying on the LORAN signal for navigationand actually converts the TD coordinate to a usefullatitude and longitude coordinate before storingthe waypoint to memory or using it for navigation.Because of this, the unit can navigate to a TDcoordinate anywhere in the world.You must know your GRI chain number andsecondary stations to create a LORAN TD position.For more information, read our LORAN TD PositionFormat Handbook, available on the Garmin Web site,at www.garmin.com/support/userManual.jsp.Loran TD Setup Page
