GPSMAP 60CSx Owner’s Manual 81M AIN MENU >To use the Constant Setup Page:1. Highlight each field in order, and press Enterto open the numerical key pad.2. Enter the appropriate value in each field, selectOK, and then press the Quit key to return tothe Jumpmaster Setup Page.Clicking the Goto HARP button begins thenavigation process and takes you to the Wind Setuppage if that information is missing or automaticallysetting up the route with the calculated HARPand then the selected DIP before taking you to theNavigation page.A check box at the bottom allows for auto-navigationto the DIP. If you want your unit to determine whenyou have jumped, this box should be checked. Amessage appears describing how to manually navigatethe route.Select Restore Defaults from the Option Menu of thispage to reset the values.The following is a list of abbreviations and acronymscommonly used and relate specifically to this feature:AGL—(Above Ground Level) indicates the altitudemeasurement.CD—(Canopy Drift) measured while the parachute isopen.DIP—(Desired Impact Point) describes the locationwhere landing should occur.Drop Altitude—measures the altitude when thejumpmaster exits the aircraft, measured in AGL.DZ—(Drop Zone) describes the area where thelanding should occur.DZSTL—(Drop Zone Support Team Leader) definesthe individual in charge at the drop zone.FFD—(Free Fall Drift) defines the distance traveledbefore the parachute is open.Forward Throw Horizontal—describes the distancetraveled forward due to aircraft speed.
