Garmin GPSMAP 64 Owner's Manual

Also see for GPSMAP 64: Quick start manual Owner's manual Owner's manual User manual

Contents

Garmin GPSMAP 64 Owner's Manual Manual pdf 12 page image

Location of Destination: The position of your final destination.You must be navigating for this data to appear.Odometer: A running tally of distance traveled for all trips. Thistotal does not clear when resetting the trip data.Off Course: The distance to the left or right by which you havestrayed from the original path of travel. You must benavigating for this data to appear.Pointer: An arrow points in the direction of the next waypoint orturn. You must be navigating for this data to appear.Speed: The current rate of travel.Speed Limit: The reported speed limit for the road. Notavailable in all maps and in all areas. Always rely on postedroad signs for actual speed limits.Speed - Maximum: The highest speed reached since the lastreset.Speed - Moving Avg.: The average speed while moving sincethe last reset.Speed - Overall Avg.: The average speed while moving andstopped since the last reset.Stopwatch Timer: The stopwatch time for the current activity.Sunrise: The time of sunrise based on your GPS position.Sunset: The time of sunset based on your GPS position.Temperature: The temperature of the air. Your bodytemperature affects the temperature sensor. Your devicemust be connected to a wireless temperature sensor for thisdata to appear.Temperature - Water: The temperature of the water. Yourdevice must be connected to a NMEA 0183 device capableof acquiring the water temperature.Time of Day: The current time of day based on your currentlocation and time settings (format, time zone, daylight savingtime).Time To Destination: The estimated time remaining before youreach the destination. You must be navigating for this data toappear.Time To Next: The estimated time remaining before you reachthe next waypoint in the route. You must be navigating forthis data to appear.To Course: The direction in which you must move to get backon the route. You must be navigating for this data to appear.Total Lap: The stopwatch time for all the completed laps.Track Distance: The distance traveled for the current track.Trip Odometer: A running tally of the distance traveled sincethe last reset.Trip Time: A running tally of the total time spent moving and notmoving since the last reset.Trip Time - Moving: A running tally of the time spent movingsince the last reset.Trip Time - Stopped: A running tally of the time spent notmoving since the last reset.Turn: The angle of difference (in degrees) between the bearingto your destination and your current course. L means turnleft. R means turn right. You must be navigating for this datato appear.Velocity Made Good: The speed at which you are closing on adestination along a route. You must be navigating for thisdata to appear.Vertical Dist to Dest: The elevation distance between yourcurrent position and the final destination. You must benavigating for this data to appear.Vertical Speed: The rate of ascent or descent over time.Vertical Speed To Dest: The rate of ascent or descent to apredetermined altitude. You must be navigating for this datato appear.Waypoint At Dest: The last point on the route to thedestination. You must be navigating for this data to appear.Waypoint At Next: The next point on the route. You must benavigating for this data to appear.System SettingsSelect Setup > System.Satellite System: Sets the satellite system to GPS, GPS +GLONASS , or Demo Mode (GPS off).WAAS/EGNOS: Enables the system to use Wide AreaAugmentation System/European Geostationary NavigationOverlay Service (WAAS/EGNOS) data. For more informationabout WAAS, go to www.garmin.com/aboutGPS/waas.html.Language: Sets the text language on the device.NOTE: Changing the text language does not change thelanguage of user-entered data or map data, such as streetnames.Interface: Sets the format of the serial interface (Serial InterfaceSettings).AA Battery Type: Allows you to change they type of AA batteryyou are using.NOTE: This setting is disabled when the NiMH battery packis installed.Serial Interface SettingsSelect Setup > System > Interface.Garmin Spanner: Allows you to use the device USB port withmost NMEA 0183-compliant mapping programs by creating avirtual serial port.Garmin Serial: Sets the device to use a Garmin proprietaryformat to exchange waypoint, route, and track data with acomputer.NMEA In/Out: Sets the device to use standard NMEA 0183output and input.Text Out: Provides simple ASCII text output of location andvelocity information.RTCM: Allows the device to accept Differential GlobalPositioning System (DGPS) information from a devicesupplying Radio Technical Commission for MaritimeServices (RTCM) data in an SC-104 format.Display SettingsSelect Setup > Display.Backlight Timeout: Adjusts the length of time before thebacklight turns off.Battery Save: Saves the battery power and prolongs thebattery life by turning off the screen when the backlight timesout.Colors: Changes the appearance of the display backgroundand selection highlight.Main, Setup, Find Style: Changes the style of the menusystem.Screen Capture: Allows you to save the image on the devicescreen.Setting the Device TonesYou can customize tones for messages, keys, turn warnings,and alarms.1 Select Setup > Tones.2 Select a tone for each audible type.8 Customizing Your Device