Garmin GPSMAP 64 Owner's Manual

Also see for GPSMAP 64: Quick start manual Owner's manual Owner's manual User manual

Contents

Garmin GPSMAP 64 Owner's Manual Manual pdf 6 page image

3 Replace the battery cover, and turn the D-ring clockwise.4 Hold .5 Select Setup > System > AA Battery Type.6 Select Alkaline, Lithium, Traditional NiMH, or PrechargedNiMH.Turning On the DeviceHold .Acquiring Satellite SignalsIt may take 30 to 60 seconds to acquire satellite signals.1 Go outdoors to an open area.2 If necessary, turn on the device.3 Wait while the device searches for satellites.A question mark flashes while the device determines yourlocation.4 Select to open the status page.shows the GPS/GLONASS signal strength.When the bars are green, the device has acquired satellitesignals.KeysFIND Select to open the search menu.MARK Select to save your current location as a waypoint.QUIT Select to cancel or return to the previous menu or page.ENTER Select to select options and acknowledge messages.MENU Select to open the options menu for the page that iscurrently open. Select twice to open the main menu (fromany page).PAGE Select to scroll through the main pages.Select , , , or to select menu options and move themap cursor.IN Select to zoom in on the map.OUT Select to zoom out on the map.Waypoints, Routes, and TracksWaypointsWaypoints are locations you record and store in the device.Creating a WaypointYou can save your current location as a waypoint.1 Select MARK.2 If necessary, select a field to make changes to the waypoint.3 Select Done.Projecting a WaypointYou can create a new location by projecting the distance andbearing from a marked location to a new location.1 From the main menu, select Waypoint Manager.2 Select a waypoint.3 Select MENU > Project Waypoint.4 Enter the bearing, and select Done.5 Select a unit of measure.6 Enter the distance, and select Done.7 Select Save.Navigating to a Waypoint1 From the main menu, select FIND > Waypoints.2 Select a waypoint.3 Select Go.Editing a WaypointBefore you can edit a waypoint, you must create a waypoint.1 Select Waypoint Manager.2 Select a waypoint.3 Select an item to edit, such as the name.4 Enter the new information, and select Go.Deleting a Waypoint1 Select Waypoint Manager.2 Select a waypoint.3 Select MENU > Delete.RoutesA route is a sequence of waypoints or locations that leads youto your final destination.Creating a Route1 Select Route Planner > Create Route > Select First Point.2 Select a category.3 Select the first point in the route.4 Select Use.5 Select Select Next Point to add additional points to theroute.6 Select QUIT to save the route.Editing the Name of a Route1 Select Route Planner.2 Select a route.3 Select Change Name.4 Enter the new name.Editing a Route1 Select Route Planner.2 Select a route.3 Select Edit Route.4 Select a point.5 Select an option:• To view the point on the map, select Review.• To change the order of the points on the route, selectMove Up or Move Down.• To insert an additional point on the route, select Insert.The additional point is inserted before the point you areediting.• To remove the point from the route, select Remove.6 Select QUIT to save the route.Viewing a Route on the Map1 Select Route Planner.2 Select a route.2 Waypoints, Routes, and Tracks