Garmin GPSMAP 695/696 Owner’s Manual190-00919-00 Rev. E 97Flight Planning Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices IndexSELECTING AN APPROACHWhen an approach is selected and activated, it replaces the destination airportwith the sequence of waypoints for the selected approach. When an approach isloaded, the destination airport remains in the flight plan and the approach sequenceof waypoints are appended to the flight plan. Keep in mind that the airport must havea published approach (GPS, RNAV, VOR, NDB, localizer, or ILS) and only the final coursesegment (final approach fix to missed approach point) of the published approach isavailable in the GPSMAP 695/696.An approach can be selected from the Direct-to Window, Waypoint (WPT) Page,Active Flight Plan Page, and the Saved Flight Plan Page.Loading an approach from the active or saved flight plan page:1) Press the FPL Key.2) Turn the FMS Joystick to display the Active Flight Plan Page or Saved FlightPlan Page.3) Press the SEL APPR Softkey; or press the MENU Key, highlight ‘SelectApproach’ by turning or moving the FMS Joystick, and press the ENT Key.The Select Approach Window is displayed.4) Turn the FMS Joystick to access a list of available approaches. Turn ormove the FMS Joystick to highlight the desired approach and press theENT Key.5) With ‘Load Approach’ highlighted, press the ENT Key. To cancel therequest, press the CLR Key or the FMS Joystick.Viewing a chart for the selected approach:1) With an approach selected in the Select Approach Window, press theMENU Key. The Show Chart Menu is displayed.Select Approach Menu2) Press the ENT Key. A chart displaying the selected approach is displayed.3) Press the EXIT Softkey to return to the Select Approach Window.
