Garmin GPSMAP 695/696 Owner’s Manual190-00919-00 Rev. EAppendix D175Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices Index5) With the Serial Data Format field highlighted, turn the FMS Joystick toselect ‘TIS In/NMEA & VHF Out’ or ‘Aviation In/NMEA & VHF Out’. Thesecomm modes send both NMEA data and VHF frequency information.The following features are now available on the radio:• Remote frequency lists for departure, enroute, and arrival airports.• Nearest VOR frequencies (SL30 only).The GPSMAP 695/696 can also directly tune a standby frequency.Selecting a standby comm frequency:1) Enter an airport identifier on the Waypoint Page.2) Move the FMS Joystick to the ‘Frequencies’ Box.3) With the desired frequency selected, press the ENT Key. The frequency isnow tuned in standby.CONNECTING TO A COMPUTERYour GPSMAP 695/696 can be connected to your computer using the included USB-PC Interface Cable to connect to a USB data port.Connecting to a computer:1) Connect the small end of your cable to the connector on the left side of theGPSMAP 695/696.2) When using the supplied USB Data Cable, connect the larger end of thecable to an available USB data port.INFORMATION ABOUT USB DRIVERSWhen connecting the GPSMAP 695/696 to a USB port, the computer prompts you tolocate the destination of the drivers for the device (a USB drivers CD is included). Onlyinstall the drivers once. After the drivers are installed, your computer always detectsyour GPSMAP 695/696 when it is connected. USB driver updates can be found atwww.garmin.com.
