Garmin GPSMAP 720/720s Owner's Manual

Also see for GPSMAP 720: Technical reference Important safety information Owner's manual Installation instructions Owner's manual

Contents

Garmin GPSMAP 720/720s Owner's Manual Manual pdf 64 page image

60 GPSMAP 700 Series Owner’s ManualRadarHiding the VRM and the EBL1. From the Home screen, select Radar.2. Select Cruising, Harbor, or offshore.3. Select Menu > Adjust VRM/eBL > Hide VRM/eBL.Measuring the Range and Bearing to a Target Object while VRM and EBL are HiddenIf you have hidden VRM and EBL (page 60), you can quickly display the range and bearing to a location bytouching the screen.1. From the Home screen, select Radar.2. Select Cruising, Harbor, or offshore.3. Touch a location.4. Select Drop VRM/eBL.Measuring the Distance to a Point on the Radar ScreenYou can touch a point on the radar screen to display the distance and bearing of that location from your presentlocation in the upper-left corner of the screen.1. From the Home screen, select Radar.2. Select Cruising, Harbor, or offshore.3. Touch a location on the screen.4. Select Measure Distance.5. If necessary, select Set Reference to measure from the selected location rather than your present location.Waypoints and Routes on the Radar ScreenMarking a Waypoint on the Radar Screen1. From the Home screen, select Radar.2. Select a radar mode.3. Touch a location.4. Select Create Waypoint.Showing Waypoints on the Radar ScreenYou can show waypoints that are within the range shown on the Radar screen. This setting does not apply tothe Radar Overlay.1. From the Home screen, select Radar > Radar Setup > Appearance > Waypoints.2. Complete an action:• Select Show to show all waypoints.• Select Navigation only to show only waypoints associated with the currently active route.Hiding Waypoints on the Radar ScreenYou can hide waypoints that are within the range shown on the Radar screen.From the Home screen, select Radar > Radar Setup > Appearance > Waypoints > Select Hide.Navigating a Saved Route on the Radar ScreenBefore you can browse a list of routes and navigate to one of them, you must record and save at least one route(page 28). Navigation lines must be showing in order to view a route on the Radar screen (page 68).1. From the Home screen, select Where To? > Routes.2. Select a route.3. Select Navigate To.4. Complete an action:• Select Forward to navigate the route from the starting point used when the route was created.• Select Backward to navigate the route from the destination point used when the route was created.5. From the Home screen, select Radar.