GPSMAP 700 Series Owner’s Manual 3Getting StartedViewing System InformationYou can view the software version, the basemap version, any supplemental map information (if applicable),the software version for an optional Garmin radar (if applicable), and the unit ID number. You may need thisinformation to update the system software or to purchase additional map data information.From the Home screen, select Configure > System > System Information.About the Home ScreenYou can use the Home screen to access all other screens.NoTe: Options on this screen vary based on the chartplotter type and optional connected devices.• Charts—allows you to access the Navigation Chart, Perspective 3D, Mariner’s Eye 3D, Fish Eye 3D, theFishing chart, and Radar Overlay.NoTe: Mariner’s Eye 3D and Fish Eye 3D chart views are available only if you use a BlueChart g2 VisionSD card (page 16). The Fishing chart is available if you use a BlueChart g2 Vision SD card or a BlueChartg2 SD card, or if your built-in map supports Fishing charts.• Sonar—sets up and provides sonar information (only available with an “S” series unit, such as a GPSMAP720s) (page 71).• Combinations—sets up a split screen displaying chart/chart, chart/sonar, chart/radar, sonar/radar, or sonar/temperature log (page 22).• Information—shows information including tides, currents, celestial data, user data, information aboutother boats, and gauges (page 36).• Mark—marks, edits, or deletes your present location as a waypoint or a man overboard location (page 27).• Where To?—provides navigation features (page 33).• Radar—sets up and shows radar (only available if the chartplotter is connected to a Garmin marine radar)(page 54).• Weather—(North America only) sets up and shows various weather parameters, including precipitation,forecast, fishing, sea conditions, and visibility (available only if the chartplotter is connected to a weathermodule and you have an XM® subscription). See the GPSMAP 700 Series Weather® and XM SatelliteRadio Supplement (North America only).• Configure—allows you to view and edit the settings for your chartplotter and system (page 44).• Man overboard—marks your present location as a waypoint, and sets a course back to the markedlocation (page 27).