9-34GTN 625/635/650 Pilot’s Guide 190-01004-03 Rev. PForewordGettingStartedAudio &Xpdr CtrlCom/NavFPLDirect-ToProcWpt InfoMapTrafficTerrainWeatherNearestServices/MusicUtilitiesSystemMessagesSymbolsAppendixIndex9.8.2 Select Altitude FilterThe Altitude Filter limits the traffic displayed to the Below, Normal,Above or Unrestricted altitude block as listed in the “Displayed TrafficRange” table. The filter altitudes are relative to ownship altitude.While viewing the Traffic page, touch the Altitude Filter key tochange the altitude filter value. Select the desired altitude filter bytouching the Normal, Above, Below, or Unrestricted keys. Theselection is displayed in the Altitude Filter field.Selected Altitude FilterFigure 9-31 Traffic Altitude Filter SelectionAltitude Mode Displayed Traffic RangeBelow -9,900 ft to 2,700 ftNormal -2,700 ft to 2,700 ftAbove -2,700 ft to 9,900 ftUnrestricted All Traffic ShownTable 9-16 Displayed Traffic Range9.8.3 TCAD 9900BX Traffic MenuThe TCAD 9900BX Menu allows control over the settings for the TCADTraffic display.1. While viewing the Traffic page, touch the Menu key.Set TrafficAudio VolumeSelect ShieldSetupSelect ApproachMode: Set, Armed,or ActiveToggle GroundMode On or OffFigure 9-32 TCAD 9900BX Traffic Menu2. Touch the desired key from the menu to make any settings.
