15-44GTN 625/635/650 Pilot’s Guide 190-01004-03 Rev. PForewordGettingStartedAudio &Xpdr CtrlCom/NavFPLDirect-ToProcWpt InfoMapTrafficTerrainWeatherNearestServices/MusicUtilitiesSystemMessagesSymbolsAppendixIndex15.12 Connext Setup - Other Bluetooth DevicesThe GTN can also configure the Bluetooth transceiver in other units, such asthe GTX 345.Touch to Setthe BluetoothNameTouch to EnableBluetoothTouch to ManagePaired DevicesFigure 15-61 Connext Setup for GTX 345From the Connext Setup page, the pilot can enable/disable Bluetooth, changethe Bluetooth name, and manage paired devices. On the Paired Devices page,the device status indicates if the portable device is paired and connected. Toconnect a different device when the maximum number are already connected,the existing connection must be ended by removing the portable device pairingor by disconnecting or disabling Bluetooth on the portable device. Removing adevice from this page by pressing “Remove” will require the device to be pairedagain before reconnecting.NOTE: If the pairing is removed from either device (portable device orinstalled avionics) it must be removed on the other device before a newpairing to that same device is established again. Essentially, the pairingmust be removed on both devices before re-pairing.New devices can only be paired while the unit is in “Pairing Mode.” Pairingmode is active while on the Connext Setup page or the Manage Paired Devicespage. The pairing must be initiated by the portable device. A pop-up will bedisplayed on the portable device to confirm the pairing.
