15-30GTN 625/635/650 Pilot’s Guide 190-01004-03 Rev. PForewordGettingStartedAudio &Xpdr CtrlCom/NavFPLDirect-ToProcWpt InfoMapTrafficTerrainWeatherNearestServices/MusicUtilitiesSystemMessagesSymbolsAppendixIndex15.6 User FieldsThe User Fields selection allows you to configure the data field type shown atthe right of the display when it is not occupied by the control for a transponder.The data shown in the field may be selected from a list after touching the desiredfield.NOTE: Data Field Types that use the term "Destination" refer to the finaldestination in the flight plan.NOTE: ETE to Destination is not available when a procedure is loaded andthere are waypoints in the Enroute section of the flight plan.1. While viewing the System page, touch the User Fields key,then touch an available field on the side of the display.Touch to SelectData TypeTouch to RestoreDefaultsFigure 15-39 User Fields Selection2. Touch the Data, Function, or Page tab to display a listof available selections. A list of information types will bedisplayed.Field Type ListTouch to SelectData FieldSelected FieldTypeSlider Indicates MoreSelections AvailablePress Finger andSlide To View MoreSelectionsFigure 15-40 Map Data Field Type Selections3. Touch the Up or Down keys or touch the display and dragyour finger to scroll through the list. Touch the desired itemto select it or touch the Back key to cancel selection.
