Garmin Gladiator TR-1 Owner's Manual

Also see for Gladiator TR-1: Installation and user manual Owner's manual Installation setup manual

Garmin Gladiator TR-1 Owner's Manual Manual pdf 15 page image

15Change Heading with U-TurnIf you program the [Right Chevron] and [Left Chevron] buttons for U-Turns, pressing the [Right Chevron]button will cause the boat to make a U Turn to the starboard, and the [LeftChevron] button will cause the boat to make a U Turn to port. You can exitthe U-Turn and return to heading hold anytime by pressing either the [RightArrow] or [Left Arrow] button.To Program a U-Turn:You must be in [Auto] or [STBY] mode before selection process can start1. Press and hold [Setup] button.2. While holding down the [Setup] button, select and light up [number 6 LED] [U-Turn] on the handheld.(press and release button until the 6 LED is lit.)3. Release the [Setup] button.4. When you are ready to initiate a U-turn press the right or left Chevron buttons, depending on the directionyou want to make the U-turn. Example: To make a U-turn to starboard, press and release the [Right Chevronbutton]. If you want this button to be a startup default, you will need to download the settings into permanentmemory, otherwise it will go back to factory defaults when the system is turned off and restarted.5. To save the changes into permanent memory and make the selected function into astartup default: Press and release the [Setup] button (the [Setup] LED should be lit),and then press and hold the [Select Load] button. While holding down the [Select Load]button, press and release the [Deckmount] On/Off button quickly, then release the GPS[Select Load] button.Press the Left Chevron Buttonto U-Turn to PortPress the RightChevron Buttonto U-Turn toStarboard