Rino ® 120 Owner’s Manual 17U NIT OPERATION > R ADIO PAGESetup TonesCall Tone—When the Call key is pressed, an attentiontone is transmitted. This option allows you to choose oneof ten tones.Roger Tone—When the Talk key is released, a tone issent to signify the end of the transmission. This optionallows you to choose one of four tones or set the tone toOff.Ring Tone—When an incoming transmission is received,an attention tone sounds. This option allows you tochoose one of ten tones or set the tone to Off. The RingTone will not sound again until there has been 45 secondsof radio inactivity.Vibrate—Choose from On or Off to have the unitvibrate when an incoming transmission is received. Oncereceived, the unit will not vibrate again until there hasbeen 45 seconds of radio inactivity.On/Off Tone—Enable or disable the tone the unit makeswhen it is turned on and off.Message Tone—Choose from On or Off to have the unitemit a tone when a message or note is received.Setup ScanlistRefer to “Scanning and Monitoring” previously in thismanual for complete information about this feature andthe options in this page.Turn Radio/GPS On/OffPress the Thumb Stick In on either of these two optionsto toggle them from on to off. For example, to turn GPSOff, press the Thumb Stick In when Turn GPS Off ishighlighted.Setup Tones Page
