Rino ® 120 Owner’s Manual 67U NIT OPERATION > PROXIMITY PAGEProximity PageThe Proximity Page lets you define an alarm circle arounda stored waypoint/contact position, and can be used tohelp you avoid dangerous areas or to alert you when youhave strayed too far away from other Rino users. Upto ten waypoints may be listed, with a maximum alarmradius of 99.99 nautical or statute miles or kilometers.If entering a proximity alarm circle, a “Near ProximityPoint ” message appears. If leaving a proximityalarm circle, a “Leaving Proximity Point ”message appears.To access the Proximity Page:1. Press the Page key or the Menu icon to openthe Main Menu.2. In the Main Menu,scroll down andselect Proximity.To add a proximity point:1. Use the Thumb Stick to highlight an empty spaceon the Proximity list and press the Thumb StickIn to display the Find ‘N Go screen. Highlight anitem from the list and press the Thumb Stick In toopen the item.2. From the Review Page, select Use. Press In againto begin entry of the proximity radius. Use theThumb Stick to enter a distance and press In.To clear one or all proximity point(s) from thelist:1. To clear a single alarm, use the Thumb Stick tohighlight the proximity point to clear and press In.Choose Remove and press In.2. To clear all proximity waypoints, highlight theOption Menu and press In. Choose RemoveAll and press the Thumb Stick In.To turn proximity alarms on or off:1. Use the Thumb Stick to highlight ProximityAlarms and press In to place a check mark.Proximity Waypoints Page
