Rino ® 130 Owner’s Manual 5GETTING STARTED > OPERATING THE RINO 130Operating the Rino 130For best results, you should initialize the GPS receiverin your Rino 130 unit before you use it the first time. Seepage 7 for instructions on initializing the unit. For mostaccurate results, the compass and altimeter should alsobe calibrated. Refer to the “Calibrating the Compass”and “Calibrating the Altimeter” sections for completeinformation.The Rino 130 is programmed to provide “pop-up”messages concerning operational characteristics andconditions. Press the Thumb Stick In to acknowledge amessage and return to the current feature.To use the Thumb Stick:• Press In to enter highlighted options and toconfirm messages• Move Up, Down, Right or Left to move throughlists, highlight fields, on-screen buttons, icons,enter data, or move the map panning arrow• Press In and hold to display Shortcuts Menu.To use the page Option Menu:1. Highlight the Option Menu on-screen buttonat the top of the display screen and then press theThumb Stick In to open the menu.2. Highlight the desired menu option and press theThumb Stick In to activate the option.3. To close without making a selection, move theThumb Stick to the Right.To lock/unlock the buttons:1. Press and hold the Thumb Stick In to access theShortcuts Menu. Highlight Enable Keylock andpress the Thumb Stick In. The Talk button is nowlocked.2. To unlock, press and hold the Page button until“Keylock Disabled” is displayed (about 5 seconds).
