16 Rino ® 130 Owner’s ManualU NIT OPERATION > R ADIO PAGESetup TonesCall Tone—When the Call button is pressed, an attentiontone is transmitted. This option allows you to choose oneof ten tones.Roger Tone—When the Talk button is released, a toneis sent to signify the end of the transmission. This optionallows you to choose one of four tones, or set the tone toOff.Ring Tone—When an incoming transmission is received,an attention tone will sound. This option allows you tochoose one of ten tones or set the tone to Off. The Ringtone will not sound again until there has been 45 secondsof radio inactivity.Vibrate—Choose from On or Off to have the unitvibrate when an incoming transmission is received. Oncereceived, the unit will not vibrate again until there hasbeen 45 seconds of radio inactivity.On/Off Tone—Enable or disable the tone the unit makeswhen it is turned on and off.Message Tone—Choose from On or Off to have the unitemit a tone when a message or note is received.Setup Tones PageSetup ScanlistRefer to “Scanning and Monitoring” for completeinformation about this feature and the options inthis page.Setup Scanlist Page