Garmin zumo 500 Owner's Manual

Also see for Zumo 500: Installation instructions Owner's manual Installation sheet Owner's manual Quick reference guide

Contents

2 zūmo 500/550 Owner’s ManualGETTING STARTEDD R A F Tzūmo 500/550 Owner’s Manual 3GETTING STARTEDD R A F TStep 1: Connecting Power to the MountSelect a suitable location to mount the zūmo on your motorcycle based on availablepower sources and safe power cable routing.Bare wires with inline fuse forpower connectionPower connectorStep 2: Mounting the zūmoThis section illustrates two possible installation solutions: A) install the U-bolt on thehandlebar and B) install the handlebar base to the clutch/brake clamp bracket. Custommounts may require additional hardware (xref to Ram Web site?).A) To install the U-bolt and handlebarbase:1. Place the U-bolt around the handlebar,and thread the ends through thehandlebar base.2. Tighten the nuts to secure the base.B) To install the handlebar base to the clutch/brake clamp bracket:NOTE: Both 1/4” standard and M6 bolts are included. Match the size of the factorybolts on your clutch/brake clamp braket.1. Remove the two factory boltson your clutch/brake clampbracket.2. Thread the new bolts throughthe handlebar base, spacers,and clamp bracket.3. Tighten the bolts to secure thebase.To attach the base plate to thezūmo cradle mount:1 Thread the M4 x 40mm flatheadbolts and nuts to attach the baseplate to the zūmo cradle mount.2. Tighten the nuts to secure thebase plate.Clutch/brakeclamp bracketHandlebarbaseSpacerszūmo cradlemountBase plateHandlebarbaseHandlebarU-bolt