45WARNING: Do not place the Design Mixer Advanced Professional over any type of heat-producing appliance, or any other heat source to avoid injuries and damage.For operation, always pull the power cord completely out of the power base to avoid risk ofoverheating and fire.7. Place the appliance on a working space that meets the requirements mentioned above.8. Place the jug on the power base. The jug must stand stable and may not wobble. Insert thelid on top of the jug. Press the lid carefully down until it closes firmly. Place the measuring cupupside down into the central opening of the lid. The measuring cup must lie in line with thelid. Turn the measuring cup clockwise to lock it within the lid.OPERATIONWARNING: The appliance is intended for cutting and mixing food. For this, the applianceis equipped with sharp knives and other electrically driven moving parts. Do not operate theappliance before assembling the appliance completely and correctly. (See: ›Operating theDesign Mixer‹) Always mount the jug correctly and stable on the power base before ope-ration. Do not allow any parts of your body (e.g. hands, hair) or any foreign objects (e.g.cooking utensils, clothes) to get in the jug or drive shaft coupling in the power base, with theappliance connected to the power supply, to avoid risks of injuries and damage. Only usethe provided pusher for pushing food down in the feed tube.Always switch off the ON | OFF button (indicator goes out), then unplug the appliance, beforeassembling or disassembling any parts. Always turn the Design Mixer Advanced Professionaloff and unplug before reaching inside the jug. Before operation, always ensure that you haveassembled the appliance completely and correctly according to the instructions in this booklet,and that there are no foreign objects in the jug. Carefully remove hard, inedible parts of yourfoods (e.g. bones, stalks, wooden shells) completely, before processing.Do not place clothes, tissues or any other foreign objects on or under the appliance duringoperation. Do not place the appliance over a power cord. Do not use any hard or sharp-edged objects (e.g. forks, knives), to avoid damage to the appliance. Do not use violence!Do not process boiling hot liquids. Allow temperature to drop before putting into the jug forblending to avoid injuries and damage due to sudden eruptive boiling, excessive steam eva-poration, splashing, and overflow.If liquids come out from under the lid, run down the exterior of the appliance and/or accumu-late under the power base, immediately switch off (pressing the ON | OFF button), and unplugthe appliance to avoid injuries and damage by electric shock. Always wipe off spilled liquidsimmediately. Do not overfill the jug. Always observe the maximum amount of 2.0 Litres. Ifliquids accumulate again under the appliance, possibly the jug is leaking. Do not operate theappliance with leaking jug. Contact your authorized service centre.Do not use the appliance, if the jug is leaking or damaged in any way to avoid hazard ofoverheating, fire, and electric shock. Replace the jug, if the jug is damaged in any way,before using the appliance again.If the motor is straining under a heavy load, do not operate continuously for more than 10seconds. Allow the motor to rest for 1 minute between uses on heavy loads.Tip: None of the recipes in these instructions are considered a heavy load