Gecko Compact Product User Manual
Also see for Blast: Product user manual
                                           | |
Contents
| 
18On-screen AlertsWhen an enabled alarm is triggered, a message will appear on the home screen to indicatewhich of the two Alarm Outputs has activated, and which parameter triggered the alarm.2019-04-01 11:52:16Alarm1: LevelAlarm2: Low VoltagePress > to dismissThe on-screen alert will be cleared after the Alarm Duration time has elapsed if the alarmcondition is no longer true (e.g. when the ground motion subsides after an earthquake).If the alarm condition persists (e.g. low voltage) the alert will be displayed on the LCD untilthe user presses the Right button to dismiss the alert. The on-screen alert for this alarmwill not be displayed again until the condition changes to false (e.g. voltage returns tonormal) and then becomes true again.The Gecko uses a data ring buffer, which means it will overwrite old data with new datawhen the memory card has only 2% storage remaining. A Low Memory alert will be raisedwhen less than 4% of storage remains.TelemetryThe Gecko has a communication port to allow streaming of continuous data to a remotecomputer. Data is sent using a custom serial protocol that communicates with our “LiveStream” application (or eqServer) which is used for data acquisition, display, remoterecorder setup, and remote firmware upgrades.Communications> Mode: ContinuousDevice: 3G modemTCP Socket PortDestination IP/DNSCarrier APNThe Gecko can stream data to a remote computer with or without an SD card present. IfTelemetry is enabled on start-up and no SD card is present, it will connect and stream data.If an SD card is removed or fails during operation, telemetry will continue regardless. |
Related manuals for Gecko Blast
manualsdatabase
Your AI-powered manual search engine