L NAPCO Security Systems X GEM-P9600 Programming Instructions!Page 63WI 1185 6/03SYSTE M RES ET OPT IONS (ADDR ESS 4091-4093)Clear Dealer Program (Erases Dealer Program)This erases the dealer program. Use this feature to start acustomized default program.Access address 4091, then press the J button. Data entry is not allowed.NOTE: Enter Easy Menu Driven Program Mode to program system again.GEM-RP1CAe2 Keypad4091 XXGEM-RP2ASe2 Keypad4091XXCold Start (Erases Entire Program)This erases the entire program (codes, schedules,foreign language configuration, etc), leaving the panel asit came right out of the box.Access address 4093, then press the J button. Data entry is not allowed.NOTE: Some features (schedules, language configuration) can only bere-programmed with the Downloading Software.GEM-RP1CAe2 Keypad4093 XXGEM-RP2ASe2 Keypad4093XXSYSTEM RESET OPTIONS
